2-way, solenoid-operated directional poppet valve - after check
Capacity:
10 gpm (40 L/min.)
Functional Group:
Products : Cartridges : Solenoid Operated : 2 Way : Poppet, after check
Model:
HDDA
Product Description
This solenoid-after check cartridge is a hybrid valve incorporating a direct acting solenoid poppet valve teed in after the check function. The check
valve flow is from the inlet (port 2) to the system (port 1). With the solenoid de-energized flow from (port 2) to (port 3) is blocked. This
combination valve is typically used in lift/lower applications and can be integrated directly into the actuator.
Technical Features
The solenoid tube assembly is fatigue rated for 5000 psi (350 bar)
service.
Coils are interchangeable with other Sun Series 1 solenoid products
and can be mounted on the tube in either direction.
Suitable for load holding applications.
Coil connector options offer ratings up to IP69K. See individual coil
product pages for details. Additional weatherized coils and kits are
available for more complete environmental protection.
D-Control
Download
L-Control
Download
M or S-Control
Download
T-Control
Download
X-Control
Download
This cartridge has several manual override choices, including no
manual override. See Option Selection below.
Incorporates the Sun floating style construction to minimize the
possibility of internal parts binding due to excessive installation torque
and/or cavity/cartridge machining variations.
This valve utilizes a wet armature design. This means that the working
fluid surrounds the armature and is exposed to the heat generated by
the coil. This can be a factor if the coil is energized for long periods of
time. Some fluids, notably water/glycol mixtures, break down at these
temperatures over time and form varnishes that
will affect the function
of the cartridge.
Technical Data
U.S. Units Metric Units
Cavity T-11A
Capacity 10 gpm 40 L/min.
Manual Override Force Requirement 5 lbs/1000 psi @ Port 1 3 kgs/100 bar @ Port 1
Manual Override Stroke .10 in. 2,5 mm
Maximum Operating Pressure 5000 psi 350 bar
Maximum Valve Leakage at 110 SUS (24 cSt) 10 drops/min.@5000 psi 0,7 cc/min.@350 bar
Response Time - Typical 50 ms
Reverse Flow Check Cracking Pressure 30 psi 2 bar
Series (from Cavity) Series 1
Switching Frequency 15000 cycles/hr
Solenoid Tube Diameter .75 in. 19 mm
Valve Hex Size 7/8 in. 22,2 mm
Valve Installation Torque 30 - 35 lbf ft 40 - 50 Nm
Seal Kits - Cartridge Buna: 990-011-007
Seal Kits - Cartridge Viton: 990-011-006
Seal Kits - Coil Viton: 990-770-006
Model Weight 0.76 lb. 0.34 kg.
HDDA-XCN
Control
Spool Configuration
Seal Material
Standard Options
D Twist/Lock (Dual) Manual
Override
L Twist/Lock (Detent)
Manual Override
M Manual Override
T Twist (Momentary) Manual
Override
X No Manual Override
Standard Options
C Normally Closed
Standard Options
N Buna-N
V Viton
Preferred
Options
Standard Coil Options (View All)
AMP Junior Timer
Deutsch DT04-2P
DIN 43650 4 pin
(Hirschman)
Metri-Pack
SAE J858A
Twin Lead
***
no coil 299 DIN 43650 4 pin
(Hirschman) 127 VDC
812 Metri-Pack 12 VDC
211 DIN 43650 4 pin
(Hirschman) 115 VAC
524 SAE J858A 24 VDC
824 Metri-Pack 24 VDC
212 DIN 43650 4 pin
(Hirschman) 12 VDC
612 AMP Junior Timer 12
VDC
828 Metri-Pack 28 VDC
223 DIN 43650 4 pin
(Hirschman) 230 VAC
624 AMP Junior Timer 24
VDC
848 Metri-Pack 48 VDC
224 DIN 43650 4 pin
(Hirschman) 24 VDC
628 AMP Junior Timer 28
VDC
912 Deutsch DT04-2P 12
VDC
248 DIN 43650 4 pin
(Hirschman) 48 VDC
712 Twin Lead 12 VDC
924 Deutsch DT04-2P 24
VDC
297 DIN 43650 4 pin
(Hirschman) 24 VAC
724 Twin Lead 24 VDC
948 Deutsch DT04-2P 48
VDC
298 DIN 43650 4 pin
(Hirschman) 220 VDC
Embedded Coil Options (Click Here)
2E12V DIN 43650 4 pin
(Hirschman) programmable
via IR link coil/power saver
12 VDC 0-10V
4E12V Deutsch DT04-6P
programmable via IR link
coil/power saver 12 VDC 0-
10V
4E24V Deutsch DT04-6P
programmable via IR link
coil/power saver 24 VDC 0-
10V
2E24V DIN 43650 4 pin
(Hirschman) programmable
via IR link coil/power saver
24 VDC 0-10V
Additional Options (Click Here)
Additional Coils
512 SAE J858A 12 VDC
648 AMP Junior Timer 48
VDC
748 Twin Lead 48 VDC
548 SAE J858A 48 VDC
72419 Twin Lead to Delphi
Weather-Pack Connector, 9
inch lead length 24 VDC
Stainless material/seal options not available for this model
Special Notes
No Special Notes Available for selected model.
| | | | | |
Copyright © 2009-2010 Sun Hydraulics Corporation. All rights reserved.
Terms and Conditions - ISO Certification - Statement of Privacy
